2-Bow 1" Dodger Frame Kit with Rigid Supports & Hand Rails 84" x 40" x 40" (Stainless Steel)
SKU: 121918
Shipping Restrictions


Build it yourself! This 2-Bow Dodger Frame Kit includes everything you need to build a dodger frame with rigid supports and handrails. A dodger top, or spray hood, offers shelter from rain and spray and is a great way to protect yourself from the harsh rays of the sun. Building your own dodger lets you affordably customize the design for your boat. This 2-bow frame kit includes the frame tubing, fittings, rigid supports and handrail (grab rail) hardware. It does not include fabric or supplies to make the dodger skin. To create a complete dodger, pair this kit with a Dodger Skin Kit (sold separately).

The included rigid support struts and handrails on both the port and starboard side are used to support the frame bows. The rigid support system (with handrails) provides optimal frame strength and increases your ability to tension the dodger’s fabric, reducing wrinkles. Rigid supports provide almost twice the strength and skin tension when compared to a traditional webbing supported dodger.

This adjustable 2-bow frame is made from 1-inch, Type 304 stainless steel tubing with a Super Buff finish. All tubing bows are pre-bent with Sailrite’s custom jig. To lower shipping costs and allow for greater customization, the bows are cut just beyond each bend, making it possible to reduce the width and height of each frame. Make width adjustments by cutting the crowned center tubing. The "hockey stick" section of each bow is fitted with Type 304 stainless steel splines and riveted into the appropriate place. This dodger frame kit also includes Universal Deck Hinges, made from Type 316 stainless steel that features pivoting hinges to adjust for many different deck angles.

Determine the desired width, height and spread (fore and aft) of your dodger. Compare to the specifications below to ensure our kit will adequately fit your boat. Our specifications are maximum dimensions for a frame with a normal set, with primary bow set at roughly a 65-degree angle to the waterline and the secondary bow at less than 90 degrees from the primary. Orientation can be adjusted—for example, the height can be increased, but it will decrease the spread.

Frame kits can be cut down from listed sizes in both height and width. To cut the tubing, use a hacksaw with a blade that has 24 teeth per inch. A rivet tool and common tools are required for assembly, but not included.

Stainless Steel Care & Cleaning:

With proper care and cleaning, stainless steel can be maintained for a lifetime in excellent condition. Many people are surprised to learn that in the presence of chloride salts, free chlorine or sulfide gases, stainless steel can take on a brownish tint, also called a patina, oxidize or even corrode. These elements are present in various environments, including ocean spray, salted highways, chemical treatments added to swimming pools and groundwater in numerous coastal areas.

The stainless steel tubing manufacturer recommends the following to properly maintain your stainless steel:

  • Wash regularly with fresh water and a high-quality detergent
  • Clean with a car chrome polish
  • Wax with either a car or fiberglass wax
  • Do not clean with chlorinated cleaners (no bleach) or scouring powders
  • Do not use sandpaper or abrasive cleaners on buffed or mirror finished metals
  • Do not clean with muriatic or hydrochloric acids

Kit Includes

  • 12 Eye Ends 316 Stainless Steel 1"
  • 4 Jaw Slides 316 Stainless Steel 1"
  • 2 Flat Mount Plates 316 Stainless Steel
  • 2 Universal Deck Hinges 316 Stainless Steel
  • 1 (5PK) Phillips Pan Head Screw #10 x 3/4"
  • 1 (5PK) Stainless Steel Phillips Oval Head Tapping Screw #10 x 1-1/4"
  • 2 (2PK) Grooved Rivets Stainless Steel (for Bimini & Dodger Frames)
  • 1 Filament Strapping Tape
  • 4 Sliding Side Mounts 1" Stainless Steel (set screws & head bolt included)
  • 1 4-foot piece 1" Stainless Steel Tubing (for handrails)
  • 2 3-foot pieces 1" Stainless Steel Tubing (for rigid supports)
  • 2-Bow 1" Type 304 Stainless Steel Frame with Type 304 Stainless Steel Splines


Hardware Material: Stainless Steel (All Types), Stainless Steel Grade 304, Stainless Steel Grade 316
Tubing Diameter: 1 inch
Tubing Wall Thickness: 0.049 inch
Maximum Width: 84 inches
Typical Spread (Fore and Aft): 70 inches
Nominal Height at Typical Spread: 40 inches
Maximum Distance Between Bows: 40 inches
Bend Radius: 6 inches



A. 84”
B. 46”*

*Crown & fittings will add approximately 3"-5" to height

Shipping Restrictions

Adding this item to your shopping cart will eliminate the Post Office as a shipping selection.


Building a 2-Bow Dodger Frame Kit w/Rigid Supports & Hand Rails

This tutorial video provides the assembly instructions for this Dodger Frame Kit, including the Rigid Supports and Hand Rails.


Overall Rating : 4.5 2 Reviews

0 Reviews
0 Reviews
0 Reviews
Page 1 of 1
Timothy Stapleton
Verified Purchase

Well constructed materials.

Tim O'Connor
Verified Purchase

Good buy

Easy to put together

Page 1 of 1


We're located in Indiana and would be happy to answer your calls Monday-Friday, 8am-5pm EST.

LOCAL: (260) 244-4647 | TOLL FREE: (800) 348-2769